MenuSearch | Country: Israel | Currency: USD
Speed Touch 6 LCD Fan Speed Controller
Discontinued
More variations available Show

Gelid Solutions Speed Touch 6 LCD Fan Speed Controller

A stylish LED Fan Controller with a convenient touch screen that can control up to six 3 or 4-pin PWM fans (30W per channel).

SpeedTouch 6 Fan Controller
SpeedTouch 6 Fan Controller

Features

  1. Capacitive touch screen panel
  2. Supports both 3 and 4-pin PWM fans
  3. Six fan control channels
  4. Can turn off fans completely
  5. Six temperature sensors
  6. 30 watts per channel
  7. Automatic and manual speed control

The SpeedTouch 6 provides control for up to six fans with each channel supporting 30W per channel. This fan controller is built into a high quality aluminium case and is fully compatible with either standard 3-pin case fans or 4-pin PWM fans like those normally found on CPU coolers. Each fan channel includes a temperature sensor and the speed of each channel can be adjusted automatically or manually.

Speed Control

The supported voltage range is 6 to 12v (or completely off) as this will allow a wide range of speeds regardless of the fan being used. Each channel can operate in manual or automatic mode. In automatic mode the temperature range is 25°C to 50°C. When the temperature is 25°C or lower, then fans will operate at their slowest speed (6V) and this will steadily rise to 12V as the temperature approaches 50°C.

The fan speed is displayed to two digits accuracy. For example, if the actual speed of the fan is 1653 RPM then it will be displayed as 1650 RPM.

Temperature Display

The temperature can be displayed in both Celsius or Fahrenheit by simply pressing the temperature reading on the display.

Screen Brightness

The brightness of the control panel can be adjusted for to suit the surroundings by pressing the brightness button on the screen.

PWM Compatibility

Please note that although 4-pin PWM fans are supported and can be connected to the fan controller, PWM functionality is not supported.

Review

  • Bit-tech.net

    Despite our reservations with the inclusion of a touch screen rather than dials and buttons, the SpeedTouch 6 is quick and easy to use and wonderfully responsive. It’s reasonably priced too and comes with everything you need you control up to six fans manually or automatically using the included thermal sensors.

SpecificationsSpeed Touch 6
Auto Control Range6v (25°C or below) to 12v (50°C or above)
Brightness (Levels)3
Control ModesAutomatic / Manual
Dimensions149 x 42 x 70mm (W x H x D)
Display ColourBlue
Fan Cable Length600mm
Fan Channelssix
Fan Connector4 Pin (supports 3-Pin & 4-Pin PWM Fans)
Form Factor5.25” Drive Bay
Manual Control Range5 to 12v (±10%)
MaterialAluminium Alloy
Maximum Wattage per Fan Channel30W
Mounting Screws4
Power Interface4 Pin Molex
Screen Size113 x 26mm (W x H)
Temperature Range0 - 100°C
Temperature Sensor6
Touch Screen SensorCapacitive Type
Warranty (years)2
Working Temperature0 - 50°C
Warranty24 months
EAN barcode4897025780897
SpecificationsSpeed Touch 6
Auto Control Range6v (25°C or below) to 12v (50°C or above)
Brightness (Levels)3
Control ModesAutomatic / Manual
Dimensions149 x 42 x 70mm (W x H x D)
Display ColourBlue
Fan Cable Length600mm
Fan Channelssix
Fan Connector4 Pin (supports 3-Pin & 4-Pin PWM Fans)
Form Factor5.25” Drive Bay
Manual Control Range5 to 12v (±10%)
MaterialAluminium Alloy
Maximum Wattage per Fan Channel30W
Mounting Screws4
Power Interface4 Pin Molex
Screen Size113 x 26mm (W x H)
Temperature Range0 - 100°C
Temperature Sensor6
Touch Screen SensorCapacitive Type
Warranty (years)2
Working Temperature0 - 50°C
Warranty24 months
EAN barcode4897025780897

Customer Reviews

Great product - but...

,

I have 2 NZXT cases, but recently the fan noise have become more noticable, so I bought this product to control the fans. However the NZXT fans use 4 pin Molex connectors, and this product comes with a smaller three pin connector type, which means I needed adapters for my fans, which added to the overall cost of the mod. Also because my fans are only two pin their speeds cannot be displayed. Though now they’re controlled the fans are quieter, so I’m very happy with the product.

Awesome Product

,

Really well built, easy to install and just works. It would be even better if it could turn fans off based on a threshold temp.

Product Resources

Top Case Accessories

Recently Viewed Products