SF850L 850W SFX-L Semi-fanless ATX 3.0 PSU Discontinued | |
More variations available Show |
Corsair SF850L 850W SFX-L Semi-fanless ATX 3.0 PSU
CORSAIR SF-L Series Fully Modular SFX Power Supplies with ATX 3.0 and PCIe 5.0 compliance provide the continuous high wattages demanded by the latest PC hardware, all in a space-saving SFX-L form-factor.
Features
- ATX 3.0 certified SFX-L compact PSU
- Supplied with one PCIe 5.0 12VHPWR GPU cable
- 80 PLUS Gold certification (up to 92% efficiency)
- Modular cables for maximum build flexibility
- Temperature-controlled semi-fanless 120mm fan
The Corsair SF8500L features micro-fit PSU connectors and fully modular, flexible cables which enable a tidy and compact build, even for exceedingly powerful systems. A 120mm rifle bearing PWM fan deploys Zero RPM mode at lower loads for exceptionally quiet performance. Japanese 105°C-rated electrolytic capacitors deliver long life and reliability, backed by a seven-year warranty. Wake your computer faster and consume less power with Modern Standby sleep mode. For high-wattage, 80 PLUS Gold power in a compact profile, the SF-L Series is your small form X-factor.
LOOKS CAN BE DECEIVING
Ideal for small form factor (SFF) PCs that don’t skimp on power, or for saving space in a larger build, SF-L Series PSUs pack a huge punch for their size.
ATX 3.0 CERTIFIED
The ATX 3.0 standard demands a high level of reliability and power efficiency. While many CORSAIR PSUs meet these requirements, SF-L Series PSUs are formally certified for ATX 3.0 compliance. PCIe 5.0 12VHPWR GPU cable included for use with modern graphics cards such as the NVIDIA® GeForce RTX™ 40 Series.
120MM FAN WITH ZERO RPM MODE SUPPORT
Cooled by a powerful and quiet 120mm rifle bearing fan, with support for Zero RPM mode to ensure your PSU stays virtually silent when not under high load.
CORSAIR TYPE 5 MICRO-FIT CONNECTORS
Fully modular, CORSAIR Type 5 Gen 1 micro-fit PSU cables, so you only connect the cables your system needs while taking up less space.
80 PLUS GOLD CERTIFIED
Steady power output at up to 90% efficiency, and Cybenetics-certified for lower power consumption, less noise, and cooler temperatures.
Specifications | SF850L SFX-L PSU |
---|---|
Model | SF8500L |
Power | 850W |
Input Voltage | 100 - 240Vac |
+3.3V maximum output current | 20 A |
+5V maximum output current | 20 A |
+12V maximum output current | 70.8 A |
Frequency | 47 - 63Hz |
80 Plus Certification | Gold |
ATX-Mainboard (20+4-pin) | Yes |
EPS / ATX 12V connector | x2 8(4+4) Pin |
PCI-Express (6+2-pin) | 4 |
SATA Connectors | 8 |
Molex Connectors | 3 |
Floppy Connectors | 0 |
Cooling | Semi-fanless |
Noise Level | Up to 40% load, 0 dBA |
Noise Level (50% load) | 14 dBA |
Noise Level (max) | 41 dBA |
Modular | Fully |
Dimensions (W x H x D) | 125 x 63.5 × 130 |
Fan | Single 120mm fan |
ATX 3.0 compatible | Yes |
Form Factor | SFX-L |
ATX adapter bracket | Yes |
Safety | OVP, OCP, OTP and SCP |
Warranty | 84 months |
EAN barcode | 0840006646297 |
Specifications | SF850L SFX-L PSU |
---|---|
Model | SF8500L |
Power | 850W |
Input Voltage | 100 - 240Vac |
+3.3V maximum output current | 20 A |
+5V maximum output current | 20 A |
+12V maximum output current | 70.8 A |
Frequency | 47 - 63Hz |
80 Plus Certification | Gold |
ATX-Mainboard (20+4-pin) | Yes |
EPS / ATX 12V connector | x2 8(4+4) Pin |
PCI-Express (6+2-pin) | 4 |
SATA Connectors | 8 |
Molex Connectors | 3 |
Floppy Connectors | 0 |
Cooling | Semi-fanless |
Noise Level | Up to 40% load, 0 dBA |
Noise Level (50% load) | 14 dBA |
Noise Level (max) | 41 dBA |
Modular | Fully |
Dimensions (W x H x D) | 125 x 63.5 × 130 |
Fan | Single 120mm fan |
ATX 3.0 compatible | Yes |
Form Factor | SFX-L |
ATX adapter bracket | Yes |
Safety | OVP, OCP, OTP and SCP |
Warranty | 84 months |
EAN barcode | 0840006646297 |
Customer Reviews
Great, quiet PSU, with slightly shorter cables
This PSU runs quiet and supports the latest NVidia 40 series GPUs.
The only issue I had (hence 4 stars) was that the included cables (for the motherboard + CPU) are only about 30cm long (my previous PSU had 60cm cables for those). If you have a larger case, make sure you order an 8-pin EPS extension cable and a 24-pin ATX extension cable to go with it (smaller cases will be fine).
Product Resources
FAQ
Do high wattage power supplies cost more to run?
No - the rated wattage of a power supply refers to the maximum amount of power it can deliver at full load, not how much power it uses. More powerful PSUs will consume around the same amount of power as lower powered power supplies in any given PC system, so your electricity bill will not be higher when using a more powerful power supply!
The best way to reduce your electricity bill when using your PC is to use a more efficient power supply or make your PC consume less power by removing components which are not needed, such as extra drives and expansion cards, or by choosing a cooler-running processor or graphics card.
My brand new power supply doesn’t work! Am I doing something wrong?
It’s possible that the power supply may be faulty, but here are some simple things to check. Firstly, a power supply will not work if you simply plug it in and flick the switch. The power supply will only turn on if you connect it to a working motherboard and associated items (processor, memory, video card, etc). It is actually the motherboard which tells the power supply when to switch on.
Secondly (if applicable), check the voltage is set correctly to 115/230 volts depending on what country you are in. Thirdly, if possible it would be good to try the power supply in another PC to see if it works, or try another power supply in your PC to see if that works. You can then tell whether it is the power supply which is faulty or the actual PC itself. If all else fails, please contact us for further support, and/or return details.
Why should I buy a whole new PSU when I could just replace the noisy fan in my existing one?
Virtually all the noise generated by a PC power supply originates from the cooling fan inside it, so simply replacing the fan with a quiet fan may seem an obvious way to go. However, if you are thinking about attempting this operation, please bear the following points in mind:
- Your existing power supply will be designed to run with a specific amount of airflow in order to adequately cool the components inside and reducing the airflow may lead to overheating and damage to the power supply and/or PC.
- All PC power supplies contain very high voltages and even with the power disconnected, the voltages stored in the capacitors can be easily enough to kill. It is not recommended to take the cover off any PC power supply for this reason unless you are absolutely confident of your own ability. Because of the grave dangers involved, all PC power supplies by law carry a warning label forbidding removal of the power supply case.
- There will be no standard PC fan connector inside the power supply to use to connect a replacement fan, and it would probably have to be soldered directly into the PCB inside the power supply, or have a specialist power connector attached. This can be a tricky operation to say the least.
Please consider the above points very carefully before proceeding with an operation to replace the fan in your existing power supply!
What is PFC (Power Factor Correction)?
If you are interested in being “green” and saving the planet, you might like to read a short explanation of how our power supplies can save energy using Active PFC (Power Factor Correction), not to be confused with Power Conversion Efficiency which is also very good in most of our PSUs. “Power Factor” is a measure of how efficiently electrical power is consumed. Ideally, Power Factor would be 1 (or 100%) and known as unity.
Unfortunately in the real world, Power Factor is reduced by highly inductive loads down to values of 0.7 (70%) or less. This induction is caused by equipment such as small electric motors, fans, fluorescent lighting ballasts and transformers such as those in PSUs. This is bad news for the electricity generating companies who can impose a surcharge on heavy users if they have a consistently low Power Factor, as more electricity has to be produced to make up the shortfall.
Power Factor Correction (PFC) is used in some equipment to minimise the inductive component of the electrical current. This helps to reduce the losses in the electrical supply to that equipment. Power Factor Correction capacitors are normally used to reduce induction in an electrical load, which minimises wasted energy and hence improves the efficiency of a company and reduces electricity costs.
It is not usually practical to reach unity, i.e. Power Factor 1, and it seems that most electricity supply companies accept consumers having a Power Factor as low as 0.94 (94%) without imposing a surcharge. Unfortunately most of the cheap (and not so cheerful) PSUs tend to have a Passive PF as low as 0.75 or 75% which in a large office can lead to a PF surcharge.
However, the good news is that most of Quiet PC’s PSUs implement a system known as Active PFC which involves some clever electronics. This means that their power factor (PF) can be as high as 0.94 or 94% (at full load), while harmful harmonic frequencies are reduced to well below legal requirements. So by using our products, you can be happy in the knowledge that you are doing your bit to save the planet!
How do I know what size of wattage power supply I need?
The best answer we can give to this question is to go ahead and take an intelligent “guesstimate”! There are no hard and fast rules about what size of power supply any given PC needs as a minimum. Our advice would be that if you are replacing an existing power supply, then consider a new one at least of the same wattage as the old one. In addition, if you wish to build in a “safety margin” to allow for reliable running and possible future upgrades, consider adding 100-200 watts to the rating of your existing unit.
If you are building a new PC, most customers now buy a power supply rated in the region of 500-800 watts depending primarily on the performance level of their graphics card(s) and number of drives to be installed. But in any event if you are unsure about which power supply would be best for your PC then please do contact us by phone or email and we will be happy to give you a specific recommendation based on your budget.
My new PSU came with a 24-pin connector but my motherboard needs 20 pins! Do I need an adaptor cable?
We receive many customer enquiries about this. In fact, most of the 24-pin compatible power supplies we sell come with special motherboard connectors which can be converted to 20-pins with no additional conversion cables. All you need to do is look carefully at the connector and you will see that the end four pins can be slid off, turning the connector into a 20-pin compatible one (see below) - easy when you know how!
Image showing how to change a power supply’s 24-pin motherboard connector into a 20-pin connector by unclipping the end four-pin blockWhat do the PSU safety protection abbreviations mean?
There are many possible safety protections a PSU can have. Below is a list of what each abbreviation means. Please note, not all PSUs have all safety protections.
- OCP - Over-Current Protection
- OVP - Over Voltage Protection
- UVP - Under Voltage Protection
- SCP - Short Circuit Protection
- OPP - Over Power Protection
- OTP - Over Temperature Protection
- UL - Underwriters Laboratories, more information.
- TÜV - Technical Inspection Association, more information.
- CE - European Conformity, more information.
- FCC - Federal Communications Commission, more information.
- RoHS - Restriction of Hazardous Substances Directive, more information.
- WEE - Electronic waste, more information.
- 80 PLUS - Promotes energy efficiency for PC power supplies, more information.
- ErP - Energy Related Products, more information.
More information on certification marks can be found here.
Top Quiet Power Supplies
Seasonic PRIME Fanless 500W 80PLUS Platinum Modular Power Supply
Streacom ST-ZF240 ZeroFlex 240W Passive PSU
be quiet Pure Power 12 M 750W 80+ Gold Fully Modular ATX3.0 PSU
be quiet 600W SFX-L Modular 80PLUS Gold PSU
Streacom ST-NANO160 160W nanoPSU and AC/DC adapter block
Seasonic PRIME Fanless 700W 80PLUS Titanium Modular Power Supply
be quiet System Power 10 650W 80Plus Bronze PSU
FSP Dagger Pro 850W SFX ATX3.0 Semi-Fanless Modular 80PLUS Gold PSU
Streacom ST-NANO120 120W nanoPSU and AC/DC adapter block
Akasa 120W Thin mini-ITX power adapter, AK-PD120-04M